For summer

Coldness insulation

Washable

Membrane technology, breatheable, waterproof

Water repellent

Non-piercable

Safety class ESD

N+XW multi-width system

Safety class S1P

Safety class S3

Graphic service available

Pure sine

Connection via German plug (2PIN)

Connection via German plug (3PIN)

Connection via German plug (4PIN)

Connection for open cable end

LED technology

Rotor technology

Voltage 12 V

Voltage 12/24 V

Voltage 24 V

Voltage 230 V

Voltage multiplier

Voltage dropper

360° view

Magnetic

Telescopic

RC technology

Pulling

Lifting

Worm gear

Planetary gear

Inductive charging

Battery is rechargeable via USB cable

Battery is rechargeable via the on-board power socket

Batteries type AA are required for this product

Batteries type AAA are required for this product

Inspection standard for electrician's face protection

Face shield for professional use - Part 1

Snap hooks made of semi-circular wire, circular wire and forged according to DIN 5299

Individual parts for lifting, towing, lashing - shackle, straight - unalloyed quality steel according to DIN 82101

Individual eye protection according to EN 166

Personal eye protection - ultraviolet protection filter according to EN 170

Rainwear according to EN 343

Gloves according to EN 388

Helmets according to EN 397

Industrial bump cap according to EN 812

Short link round steel chains for lifting purposes according to EN 818

Flat woven lifting slings made of synthetic fibres according to EN 1492-1

Round slings made of man-made fibres according to EN 1492-2

Mobile or movable lifting devices and related equipment according to EN 1494

Individual parts for sling gear according to EN 1677

Forged components for sling gear, category 8 according to EN 1677-1

Forged hooks with safety latch for sling gear, grade 8 according to EN 1677-2

Forged, self-locking hooks for sling gear, category 8 according to EN 1677-3

Tie-downs made of synthetic fibres according to EN 12195-2

Tie-down chains according to EN 12195-3

Minimum breaking load according to EN 12385-4

Lifting bag systems for fire and rescue service use - safety and performance requirements according to EN 13731

Forged steel shackles for general lifting purposes - straight and bent shackles - category 6 according to EN 13889

Power driven winches according to EN 14492-1

Warning clothing according to EN ISO 20471

Live working - electrical hazard (EH) footwear - Part 1

Electrically insulating helmets for work on low-voltage systems

Live working - hand tools for use up to AC 1 000 V and DC 1 500 V according to EN 60900

Gloves of insulating material according to EN 60903

Protective clothing against electric arc according to EN 61482

Reflector approved according to ECE R3

Number plate light approved according to ECE R4

Direction indicators approved according to ECE R6

Brake, tail light, clearance light approved according to ECE R7

Approved according to ECE R10 (EMC)

Reversing lights approved according to ECE R23

Rear fog light approved according to ECE R38

Fitting and use of lamps and headlamps

Flashing or warning lights according to ECE R65

Side marker light approved according to ECE R91

Headlight approved according to ECE R112

Light signal devices according to ECE R148

Devices for road illumination according to ECE R149

Approved according to CISPR25 class 3 (EMC)

Approved according to CISPR25 class 5 (EMC)

Approved for the transport of hazardous goods

Safeguarding loads on on-road vehicles - Securing passenger cars and light commercial vehicles on vehicle transporters